About Comments

Comments are enabled on all postings. Click a posting to find the comment box. Comments are moderated and appear after my review.

Friday 5 January 2018

Project 18 - Jetty (Part 3)

The decision as to whether to have the trawler berthed or away from the jetty was made for me when I looked at prototype photographs and the position of trawler relative to jetty in the box.

Unwittingly the scene I have created is low tide. In fact the tide is at its lowest point when the harbour mud bottom is revealed with boats stranded on it. However, the trawler hull design is such that it is meant to be floating on water. Whilst the keel may be just on the mud the water level will be modelled at the hull water line. This solves another issue as to what colour the water should be. With tide that low it will need to be a muddy colour.

The jetty side is a photograph of the real jetty. It shows the wide variation in colours and texture that is visible at low tide. This would be difficult to reproduce authentically by other means.

In the 1960s the pilings at the jetty side were set at about 11 feet intervals. The brown balsa wood pilings shown in the photo need to be embedded in the rippled harbour water and will be fitted when the water is created.

On an academic note, that does not apply to the period of this model, in the 1930s horizontal fender beams were set between the pilings a few feet below the top of the jetty.

To Part 6.

To Part 1.




No comments:

Post a Comment

Related Posts Plugin for WordPress, Blogger...