About Comments

Comments are enabled on all postings. Click a posting to find the comment box. Comments are moderated and appear after my review.

Sunday 19 February 2017

Project 17 - Long Grass & A Miracle Glue

I return to the long grass issue cited in Part 6. Instead of trying to apply the hemp with a static grass applicator, which was unsuccessful, I simply pinched bunches, trimmed the ends square, dabbed in fast drying PVA glue and stuck in place. Then, whilst still wet, trimmed the height with scissors and  straightened the strands by gently brushing upwards with a toothbrush and from the suction of a vacuum cleaner, which also removed loose pieces.

The hemp is a bit too straw like in colour so I greened it up a bit by dry brushing with green acrylic paint.

The telegraph pole and gradient notice {inset) are also new additions to the scene.

Sticking the A4 back scene printed paper sheets to the back board posed the problem of what glue to use. I knew from experience that conventional glues can lead to air bubbles, creases and stick too fast to allow re-alignment.

My research lead me to Acrylic Matte Medium. This is a gel mainly used to alter the glossiness of acrylic paint. I learned that it can also be used as a paper glue that overcomes all of the issues stated above.

This area of the layout is quite awkward to fit the back scenes in place and I did have problems with the second piece resulting in air bubbles. But I was able to peel it off, apply more matte medium and stick it down smoothly without damage to the printed paper.

To Part 9.

To Part 1.

No comments:

Post a Comment

Related Posts Plugin for WordPress, Blogger...